Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

On My Bench - French Polish
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5751		 Page 1 of 1
Author:  hoosierukes [ Mon Mar 20, 2006 1:21 pm ]
Post subject: 
I spent all of last week excited to spend 2 really focused days in the shop.

It was not to be. The flu hit me hard on Friday night and I was down all weekend. I'm still running a low fever, but can function...so I spent some time in the shop today.

It was time weel spent.

I've struggled with French polish since I began building three years ago. I really like traditional techniques and have no desire, place or equipment to spray laquer.

I make no claim on mastering French polish, but for the first time, I have a handle on it. It was truly exciting to watch a really glossy finish build.

I do have some problems around the fretboard. The Muneca doesn't get into the corners. It will take practice to get into the corners without slowing down or laying an uneven finish.

I made some minor leaps in inlay cutting. I've been having some real problems seeing my work. I've tried glasses, magnifiers, etc. All are exercises in frustration. The solution was simple to purchase a stool that put my face and eyes at work level without straining.

I'm encouraged to do some more elaborate inlay..and finish the circus uke, I've been putting off.
Author:  Michael Dale Payne [ Mon Mar 20, 2006 1:48 pm ]
Post subject: 
Geoff the FP finish looks just as it should. nice job
Author:  Joe Beaver [ Mon Mar 20, 2006 2:36 pm ]
Post subject: 
Good looking guitar and finish my friend. I wish I was up to trying french polish, maybe someday. Joe Beaver38796.9428703704
Author:  Serge Poirier [ Mon Mar 20, 2006 3:19 pm ]
Post subject: 
Geoff, i'm in the same position as you regarding the finishing steps of an instrument, i don't want to spray, i'd love to french polish all my builds to come.

Yours polishing is looking great and so is the uke bud!

Thanks for sharin'!
Author:  Colin S [ Mon Mar 20, 2006 8:40 pm ]
Post subject: 
To french polish up to the fingerboard or around a pre-glued bridge don't use your usual rubber (muneca) but cut a small wedge of hard felt and wrap that in your cloth. The point of the wedge will fit tight into the corners.

Colin
Author:  hoosierukes [ Tue Mar 21, 2006 1:37 am ]
Post subject: 
Thanks Colin...It sounds like a good use for all of those felt uke picks that my students try to use.
Author:  CarltonM [ Tue Mar 21, 2006 9:12 am ]
Post subject: 
Geoff, that warm glow and color on the top looks great!
Author:  Carey [ Tue Mar 21, 2006 12:09 pm ]
Post subject: 
Geoff, beautiful patina and color! What shellac are you using?   Best, Carey.
Author:  hoosierukes [ Tue Mar 21, 2006 2:30 pm ]
Post subject: 
I don't remember. The label is off the bag. I do remember that it came from Woodcraft. I also always buy the darkest shades I can find. I like the golden glow of vintage finishes and think that this comes as close as one can come.
Author:  hoosierukes [ Tue Mar 21, 2006 3:23 pm ]
Post subject: 
Here 'tis..

Hock Dewaxed Shellac from Woodcrafters. Upon reflection, I suspect I use the orange. I'd better figure this out if I want to repeat my success.

Author:  Carey [ Tue Mar 21, 2006 4:27 pm ]
Post subject: 
Very nice. The darker, less refined shellacs also seem to
hold up better.. Doubly good!   CW
Author:  Serge Poirier [ Tue Mar 21, 2006 4:29 pm ]
Post subject: 
Hi Carey, welcome to the OLF!

SergeSerge Poirier38798.0206828704
Author:  Carey [ Tue Mar 21, 2006 4:38 pm ]
Post subject: 
Thanks Serge- been lurking for quite a while; a fine group here!   CW
Author:  John Elshaw [ Wed Mar 22, 2006 12:32 am ]
Post subject: 
Geoff,

Your FP job looks great. I also struggle with using FP around an attached fingerboard on classical guitars. I've found that you can take an eraser (the parallelogram type) and cut it to any shape you need and put it under your muneca. It works really well for getting in the cracks.

Cheers!

John
Author:  James Orr [ Wed Mar 22, 2006 5:08 am ]
Post subject: 
I agree about it looking tremendous. What cut of shellac are you using?
From what I've been researching lately, it seems like people are saying go
with a 2 pound cut.
Author:  hoosierukes [ Wed Mar 22, 2006 5:27 am ]
Post subject: 
Thanks for the kind words. This is really the first time that I felt that I had any control over the process. Often the process controls me.

I used a 2 lb. cut.

Author:  CarltonM [ Wed Mar 22, 2006 7:05 am ]
Post subject: 
Here's some more confusion for you...

Those Hock shellac flakes are a very good product, and all dewaxed (you can also buy them at his web site). I think, but don't know for sure, that his supplier is Liberon--the folks at shellac.net, but they seem to run out of some colors before Hock does! I've noticed that Woodcraft now carries the Liberon flakes in addition to the Hock shellac; but not all of the Liberon product is dewaxed. Be sure you know what you're buying before you pays your bucks!CarltonM38798.6311921296
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/